Piston Compressor Chillers
Large reciprocating compressors operate in the same way as in other reciprocating compressors, with a few differences. These chillers range from 10 to 100 tons. Most manufacturers not to use one large reciprocating compressors on the system. Instead, several smaller compressors are used. Cm. Fig. 24-72, This method allows you to make a backup system if one compressor must fail. Several compressors also allows to increase the capacity management. 12 cylinders may be necessary for large reciprocating compressors with the purpose of obtaining the required pumping capacity.
Refrigerants, most often used with reciprocating system R-500 and R-502, R-12, R-134a and R-22. R-22 is the most commonly used refrigerant. Piston compressors, reciprocating compressors. Most wear the compressor occurs during startup. This is because the oil pressure and was not created. These machines are loaded with moving parts and a lot of friction creates pressure in the lubrication system at all reciprocating compressors 5 HPS. and more. It is necessary to reduce power when starting to mitigate fluctuations in temperature and unnecessary Cycling of the device.
..
|
Industrial 