Charging cylinder
Charging cylinder allows you to charge the heat accelerate the process of charging. This unit, with its heater Assembly, allows up to 50 watts of heat used in charging. Refrigerant quickly removed from the cylinder, as the liquid is introduced into the system as a gas with Vizi-Vapr. It requires no heat during the charging process. In Extracta-charger allows serviceperson to carry small quantities of refrigerant to work. The refrigerant can be bought in large drums and stored in the store. In Extracta-Card supplied in a sturdy steel case for protection from the severe conditions of operation. It also provides a method for refrigerant drain even of the capillary tube, closed systems.
Now just need to grab a refrigerant leak. In Extracta Plata is the tool to use. When the system is overloaded, the excess can be transported back into the drum. The amount removed can be measured. Leak discovered after charging operation, usually means the loss of a full charge. Using this device, serviceperson can remove it and save it for use after the leak found and restored.
..
|
Industrial