Thermostatic Control Engine

This control is typically used in large stand-alone installations. For multi-evaporator systems, thermostatic motor control is used to sense warm evaporator case. System size, so that when the device switches off the compressor (when reaching the desired temperature in warm condidoned space), there is sufficient cooling is achieved in the cool air-conditioned comfort. This allows each separate office in several of the installation, which will be monitored.

Some are made from a very close differential such as (0.53C). They are used to render certain cases bulk milk coolers, frost alarm, fluid coolers and refrigerators.

Thermostatic control motor popular in brine for refrigeration. Sensitive lamp immersed in brine. Ice cream cabinets typical example. In one case of installations, feeling lamp, as a rule, in the closet 4' up from the floor. It is located between cold and warm air ducts and at least 2" from the wall.

Some wall in the walk-in refrigerators, meat storerooms, warehouses, and florist cabinets. Some double-throw contact (SPOT). With these control can also operate other devices (fans and defrosting systems)...