Water Float Switch

In some applications where the evaporator section was installed in the attic, the subsidiary condensate is used. If the main condensate drain pan should be limited condensate waBTer will overflow into the auxiliary pallet. Float switch that has a wired chain management through him is mounted inside the auxiliary pan. When the float rises, the switch opens and stops the air handling unit. This subsidiary pan should be displayed separately in the attic, beyond a structure that will be obvious when water was dripping from the drain. Perhaps, near the main entrance would be a good place. There, if the owner of the structure sees as dripping water from the pipe, he knows that his main drain line for air conditioning is clogged. This procedure allows you to avoid costly repairs ceiling and designpossible damage to the furniture, located under the evaporator section. It helps if the technician installing a water float switch left a note in the condensing unit, saying that the float switch is in use. One note can leave instructions on how to automatically switch numbers or any other data would be useful.

During operation, as a rule, are located behind the evaporator fan motor inside the Cabinet evaporator section. A fan relay, is also in this same section.

..