SOLENOID VALVES

the electromagnetic valve with electric actuator to the valve. He uses electromagnetic field, to raise the pilot valve. Gas pressure raises the main valve, allowing the flow. RSS will continue until the pilot valve held leave his place. Valve Fig. 12-8 is typical. It can be used with liquid, steam or high pressure gases. The condensing unit, it can be used for pumping liquid line valve or anti-slug valve. If they are used for pumping valve, the device must have low pressure control to stop the operation of the compressor. For use as an anti-slug, valve wired to close as soon as the compressor is stopped. This prevents any liquid in a vertical liquid line from falling into the compressor. When mounting solenoid valve, it is good practice to set the valve to work in the vertical plane. This will require the intake and exhaust valve be in the horizontal plane. Electromagnetic coils are available in 24, 120 and 240 volts.