Home 

Content

Technical information Air-Conditioning Coal and Wood Heating

Coal and Wood heating

In some areas of the country's abundant supply of solid fuel there is. This is usually in the form of wood or coal. In order to save energy, some homeowners using solid fuel. It may provide some or all of its heating energy needs. Commercial systems that replace natural gas or oil heat supply sources, with wood-or coal-burning sources. This can be found in hydraulic systems, and exhaust systems.

The use of wood or coal may be more economical in some situations. However, usually requires a significant amount of attention on the part of landlords. It takes a while to load fuel, Stoke the fire, and clean the ashes. In addition, flue and chimney should be regularly and carefully maintained. Solid fuels burning dirtier than conventional fuels. This means that you more soot in the pipe and chimney.

Heating with solid fuel unit is usually used as part of a conventional oven system. An example of this is a system that uses a heat exchanger in the fireplace, This heat exchanger is connected in series with conventional heating duct system in the house. When the fire in the fireplace heat exchanger draws latent heat. (This is the latent heat from the water vapor in the fireplace flue gases.) Warm air is distributed through forced air ducts...

 
Thanks ->



Ammonia pipe sizing Csr compressor wiring diagram Expansion valve calculation Function of evaporator Halide torch Laws of refrigeration Oil safety switch Plate and shell heat exchanger Pressure limiting txv R600a refrigerant pressure temperature chart Refrigerant oil types Refrigeration load Rsir compressor
Copyright @ 2009 - 2020, "www.ref-wiki.com"