Starting Refrigerator-Freezer
Test the outlet with a voltage meter, to be sure, there is electricity. Put the temperature control to the off position. Connect the power cord to an electrical outlet. Then check the device to run before moving to the fridge for a place.
When you run the refrigerator for the first time, temperature controller, in the middle of its range. After several hours of work, check the thermometer in the fresh products (refrigerator compartment. Adjust the temperature control setting on the customer requirements.
If the refrigerator does not start, make sure that the electrical circuit in good condition. Then check for mechanical trouble. Open and close the doors to make sure that the interior lights are working properly.
Note. If the refrigerator-freezer with capillary tube refrigerant control stopped and then started immediately, it might not work. This is not necessarily a failure of the engine in this type of refrigerator provides enough torque to overcome the high pressure. Unplug the refrigerator for a few minutes. This allows the refrigerant pressure / time balance between the high and low sides. Then start the system...
|
Industrial