Home 

Steam absorption chiller libr wiki

Technical information Chillers Lithium Bromide - Water Absorption Chiller

Lithium Bromide Absorption Chiller Water

In-LiBr absorption system, which is often used for chilled water applications on 5C and above. One effect absorption chillers can work with hot water 85 C to 90 C or low-pressure steam pressure up to 3 kg/crfig. Double-effect chillers require a temperature of not less than 140C or above, which is available only steam from 7 to 9 kg/cm2g or hot water under pressure of about 160C or direct combustion of fuel. Evaporator-shock under pressure 6mmHg and temperature of about 4C. generator is about 160C, full load, reduces as part of a load. Condensation of water in the condenser generator occurs at a pressure 75mmHg and temperature of about 45 C...
 
Thanks ->
Ammonia pipe sizing Compressor types Csr compressor wiring diagram Expansion valve calculation Halide torch Laws of refrigeration Metering device Plate and shell heat exchanger Pressure limiting txv R600a refrigerant pressure temperature chart Refrigerant oil types Refrigeration load Surge receiver
Copyright @ 2009 - 2022, "www.ref-wiki.com"