Destruction Of Water-Cooled Condensers
Capacitor leakage is to be removed and repaired or replaced. Removing water-cooled condenser, similar to removing the air-cooled condenser. However, the water level should be disabled. To do this, first turn off the water circuits. Then disconnect from the water line and drain water from the condenser. (It may freeze.) Recover refrigerant from the condenser and isolation of the capacitor. Avoid freezing temperatures. If the pressure-valve actuator water use, leave it installed in the system, if possible. This is necessary as it refrigerant pipe connections.
Clean the outside of the capacitor, wipe the water, and clean the condenser connections. Dry connection carefully. If mechanical connection, use wrenches of the appropriate size. Wear gogglesl Plug refrigerant holes simultaneously, using a good plug. Or synthetic rubber expansion plugs or flared tube is recommended. If the condenser is heavy, use a lifting device. When lifting device is not available, have two or more persons, move...
|
Industrial