Filter Driers (Suction)
Filter-driers are often installed in the suction line eliminates the penetration of foreign particles from entering the compressor. Particles of more than 5 microns, as well as acids, sludge, dust, moisture, and also not allowed into the compressor. Mesh filters (screens) are usually made of Monel metal.
Only two things must be allowed inside the refrigeration system: dry, clean refrigerant and good, dry oil. The system, which is clean, dry and acid-free is to run indefinitely. Corrosion, lockups, oil breakdown, or hermetic motor burnouts should not happen. In such a system, there is nothing to filter and plugging it is impossible. Clean, dry, acid-free system remains plant bright and trouble-free operation.
Suction line, filter drier must be replaced when the pressure drop is excessive. The table below indicates the maximum allowable pressure drop to replacement of the filter-dehydrator. If the pressure drop exceeds this amount, filter driers should be replaced...
|