Electromagnetic Two-Temperature Valve
The thermostat is connected in series with a solenoid valve also provides a variety of devices temperatures in multiple installations. Electromagnetic shutoff valve is usually placed in the liquid line of the evaporator, it manages. There are air conditioning and electrical thermostat connection.
The thermostat controls the temperature device. When the device does not reach the required temperature, the thermostat opens. Electromagnetic loses its magnetism and closes the valve. More refrigerant enters the evaporator. The Cabinet will gradually warm up until the thermostat points close. Electromagnetic valve opens, and the refrigeration cycle starts again.
This cooling system control based on temperature device. Condenser pressure is monitored motor control. The engine will not stop until all devices are cooling their correct temperature. Some systems have a solenoid valve in the suction line. This prevents removal of the refrigerant from the evaporator.
This system uses an electromagnetic normally open and thermostat. He breaks the chain on the decrease of temperature and closes her to increased temperatures. When magnetized, the valve closes. Solenoid valve is also used to stop on the side of low pressure flooding during the off cycle. The solenoid is also in the liquid line. It is electrically connected in parallel with the pressure of motor control.
..
|
Industrial