Moisture and Ice in the Cabinet of Isolation
The presence of moisture and ice in the Cabinet insulation is serious. This means that there is no air leakage outside of the Cabinet of print or shell. Leak allows the warm, moist air to come in this space. When the warm air blows cold inner liner, it gives up its moisture.
When this happens in the refrigerator, wardrobe, isolation becomes wet. It will lose its heat-insulating properties. There will be two indications of this disaster:
- The condensing unit will run more often than normal.
- Tyres outer surface of the refrigerator will feel colder where insulation is wet.
In the freezer, condensed moisture will form ice in isolation. Symptoms Will be the same as in the refrigerator. If it will be repeated enough ice will soon build sid es Cabinet, with a buckle. Leak on the outer surface of the Cabinet must be located and completely sealed.
Most freezers provide a small hole through the inner lining. This connects an isolated area inside the freezer Cabinet. The temperature inside the freezer is significantly lower than the temperature of the insulation. Therefore, any moisture will seek to escape through this little hole. Then condense on the surface of the evaporator...
|