Refrigeration Compressors

Air conditioning systems that are designed for domestic and light commercial use are split into three sections. In each section there are many components. The main components are the condensing unit, evaporator unit and the thermostat. In some geographical areas, some names may differ. For example, some might call evaporator air handling unit. Both are right.

Condensing units installed wherever the Builder thinks that it will be cost effective. Because some of you might live in a house, some condominium, some duplex. Those of you that may indicate condensing units are lucky. Many owners do not even know where their condensing unit is located. A service call, you can spend some time trying to find the clients unit. Maybe a Parking lot. Sometimes he is on the rooftop in clusters with other departments. This gives an idea about the fact that in some areas, there may be a little time spent on the search condensing unit. When you find it, and it is located in a unique place, make an entry in evaporator unit or entrance to the panel, where the unit is located.

Capacitors can heat transfer using air or water as the primary coolant. Air-cooled condenser units, as a rule, are located in the outside air to be effective. Water cooled different. The heat carrier can be transmitted in the unit regardless of where it is. Package unit is a unit that has only one section. The condensing unit and the evaporator and sometimes thermostat located within a single Cabinet. I tell you, to save you from the embarrassment of looking for the air-cooled condenser with water-cooled units.

Before opening the cover of the condensing unit, switch off the power supply. Always remove the cover slowly for many reasons. You might come face to face with animals, or the pressure of the refrigerant lines, about to burst. The panel is removed, you can look inside and begin to identify some of the details that make the condensing unit work.

..