Home 

Ref-Wiki.com -

Technical information Refrigerants Sulfur Dioxide

Sulfur Dioxide

Sulphur dioxide (SO2) is a colourless gas or liquid. It is toxic, with a very sharp smell. When sulfur burns in air, sulfur dioxide is formed. When sulfur dioxide combines with water, it produces sulphuric and sulphuric acids. These acids are very corrosion of metal. They have a negative impact on most materials. Sulfur dioxide is not considered safe refrigerant. As a refrigerant, sulphur dioxide works in a vacuum, to give the desired temperature. Moisture in the air will be involved in the system when a leak occurs. This means, metal parts, ultimately corrosion, causing compressor grab. Sulphur dioxide (SO2) boils at a temperature of 14 degrees F (10 degrees C) and has a heat of vaporization at boiling point (1 atmosphere) 172.3 BTU/lb. It has the latent heat of combustion 166 BTU / lb.

To produce the same amount of refrigeration, sulphur dioxide requires about one-third more steam than Freon and methyl chloride. This means that the condensing unit is operating at high speed, or that the compressor cylinders must be larger. Starting with sulphur dioxide does not mix well with oil, the suction line must be constantly bias machine. Otherwise the oil will pick up, gripping the suction line. This refrigerant is not suitable for use in some places.

..

 
Thanks ->



Application of refrigeration in chemical industry Circuit breaker Condenser Capacity Contact freezing Copper pipe sizes inches to mm Effect of superheating on cop Hermetic compressor High side of a refrigeration system Oil separator in refrigeration cycle Pressure switch Refrigeration compressor Capacity control Refrigeration oil pressure switch wiring diagram Thermal conductivity of brine
Copyright @ 2009 - 2022, "www.ref-wiki.com"