Home 

Ref-Wiki.com -

BLOG
Blog
Estimating heat loss and heat gain
Heat transfer through the building envelope depends on the materials used; geometric factors, such as size, shape, and orientation; - availability of internal sources of heat; and climatic factors. System design requires each of these factors for the study and the impact of their interactions to be carefully assessed.

The main function of heat loss and heat calculation of profit : assessment of capacity that will be needed for different heating and air-conditioning components necessary to maintain comfort in space. These calculations are therefore based on the maximum load for heating and cooling and corresponds to the climatic conditions, which are far from the extremes that are usual. Standard exterior design values of temperature, humidity and sunlight, can usually be obtained from the directory.....

 
Air quality
Air quality must be maintained to ensure a healthy, comfortable environment indoors. Sources of pollution exist in both the internal and external environment. Indoor air quality is controlled for the removal of pollutants or by dilution. Ventilation plays an important role in both processes. Ventilation is defined as air, natural or mechanical means to the place. As a rule, the ventilation air from the outside air and recirculated air. Outdoor air dilution. In most cases, odor and irritation of the upper respiratory tract and eyes reason for ventilation, but not the presence of hazardous substances. The possibility of polluting substances should not be overlooked, however. ....
 
Thermal comfort
First, the body heat is generated by metabolic processes to maintain body temperature. Metabolic processes are influenced by factors such as age, health condition and level of activity. For example, a given range of environmental conditions may be quite acceptable in the space occupied by a healthy person, but unacceptable to those who are ill. When the people are ready to adjust their dress habits depending on the season, they find that they are comfortable in a wide range of environmental conditions than they could expect.

The body is constantly a source of heat that must be eliminated to maintain a constant body temperature. Various mechanisms to control the temperature is described in Sec. For a person in a state of rest or do light work in air-conditioned comfort, dissipates heat of the body, mainly by convection (carried away by the atmospheric air and radiation (for the surrounding surfaces, which have a lower temperature than on the surface of the body). Each of these components heat dissipation is approximately 30 percent of heat loss. Evaporation breath and sweat, account for the remaining 40 percent. As environmental conditions or change in activity level, these percentages will vary. For example, if a person does the heavy work, the main heat dissipation mechanism will evaporation.....

 
Entropy
Although the entropy s important technical and philosophical overtones, we will use this property in specific and limited. The entropy will have a lot of graphs and tables properties and is mentioned here, so it will not be unfamiliar. The following two implications of this property:
  1. If the gas or vapour is compressed or expanded frictionlessly without addition or removal of heat during the entropy of matter remains constant.
  2. The process described in the involvement 1, the enthalpy change represents the amount of work per unit mass needed compression or delivered expansion.
....
 
Pressure
normal Pressure p (perpendicular) to the force exerted by the fluid per unit area, against which the force of pressure. Absolute pressure to measure the pressure is higher than zero gauge pressure measured above the existing atmospheric pressure.

Pressure units in Newtons per square metre (W/m2)also called Pascal (PA). Newton is a unit of power. Standard pressure 101,325 Pa = 101,3 kPa.

Pressure is measured using tools such as pressure gauges, pressure gauges or, shown schematically installed in the air duct. Because one end of the mA-ometer is open to the atmosphere, the deviation of water pressure sensor, pressure gauge shows how to measure.....

 
Temperature
temperature t substance indicates its thermal condition and ability to exchange energy with the substance in contact with him. Thus, the substance of high temperature, transfers the energy to the lower temperature. Landmarks Celsius is the temperature of the water freezing (0) and boiling point of water (100C).

The absolute temperature T in degrees above absolute zero, expressed in degrees Kelvin (K), T - t C + 273. Because the temperature ranges of the two scales are identical, the differences between the Celsius temperature stated in degrees Kelvin.

....

 
Thermodynamic properties
Another essential element in the analysis of the heating system of the identification of relevant thermodynamic properties. Property or of any characteristic attribute of matter which can be assessed quantitatively. Temperature, pressure and density, all of the properties. Work and heat transfer can be evaluated in terms of changes in the properties, but they are not properties themselves. Real estate is one."" Work and heat transfer is that "made" for the system to change its properties. Work and heat can only be measured on the boundary of the system, and the amount of energy transferred depends on how this change occurs. ....
 
<< Start < Prev 1 2 3 Next > End >>

Page 3 of 3
Thanks ->



Back pressure valve in refrigeration system Capillary tube refrigeration Deep freezer Wikipedia Forced draught cooling tower Hand operated expansion valve Industrial refrigeration definition Motor winding Refrigerator compressor temp discharge Repulsion start induction run motor Thermosyphon cooling system Vapour absorption refrigeration system Wikipedia Viscous air filter Water cooled condenser
Copyright @ 2009 - 2022, "www.ref-wiki.com"